Return-Path: Received: from olympus.net ([198.133.237.6]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-64832U3500L350S0V35) with ESMTP id com for ; Fri, 14 Jan 2000 12:30:43 -0500 Received: from on194157.olympus.net ([207.149.194.157] helo=bill) by olympus.net with smtp (Exim 3.12 #3) id 129AdW-0003bK-00 for lancair.list@olsusa.com; Fri, 14 Jan 2000 09:35:46 -0800 Message-ID: <001001bf5eb5$e4b19cc0$23c295cf@bill> From: "William T Bartlett" To: References: <20000114050103.AAA26738@truman.olsusa.com> Subject: Re Hydraulic gear stops Date: Fri, 14 Jan 2000 09:35:52 -0800 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Using washers as spacers on a hydraulic rod NO. There are all kind of rod stops that use nothing more than a couple washers to jam-stop the cylinder. Depending on which way they tilt they can jam a cylinder in either direction, They can actually dig in hard enough to mark the cylinder rod. This has been discussed several times on the list. Bill N7WB >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>