> Does anyone have a correct wiring schematic for the Outback Flaps
> on a Lancair 360? The manual is for a standard build flap system
> and as far I can tell it doesn't work with the Outback setup.
> Example: In the standard flap setup the manual makes a big deal
> about identifying which wire (red or black) makes the actuator
> extend and put the flaps down. In the Outback, the extension of
> this actuator brings the flaps up.

Can't you just wire it the same way, then install the switch upside down?


BTW, as long as you're wiring that section, might be a good time to
install the diodes on the relays, or better yet, bidirectional zener
diodes:

A nicely packaged kit:
http://periheliondesign.com/suppressors.htm
http://periheliondesign.com/suppressors/SnapJack.pdf

Or the raw parts:
http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=P6KE18CALFCT-ND