X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Thu, 05 Jul 2007 15:48:17 -0400 Message-ID: X-Original-Return-Path: Received: from mail.stoel.com ([198.36.178.142] verified) by logan.com (CommuniGate Pro SMTP 5.1.10) with SMTP id 2160078 for lml@lancaironline.net; Thu, 05 Jul 2007 15:06:25 -0400 Received-SPF: pass receiver=logan.com; client-ip=198.36.178.142; envelope-from=CSLEWIS@stoel.com Received: from gateway1.stoel.com ([198.36.178.141]) by mail.stoel.com (SMSSMTP 4.1.9.35) with SMTP id M2007070512053829315 for ; Thu, 05 Jul 2007 12:05:38 -0700 Received: from sea-mx1.stoel.com (unknown [172.17.103.4]) by gateway1.stoel.com (Firewall Mailer Daemon) with ESMTP id E9005AF058 for ; Thu, 5 Jul 2007 12:06:09 -0700 (PDT) X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Subject: RE: [LML] Flap Switch X-Original-Date: Thu, 5 Jul 2007 12:07:55 -0700 X-Original-Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [LML] Flap Switch Thread-Index: Ace/Cu/bC44m+vu0TxGL9kk4BoQrMgAKyK+3 References: From: "Lewis III, Charles S." X-Original-To: "Lancair Mailing List" Garry: =20 For what it's worth, my flap switch is momentary-off-momentary. Because = I do not use the flaps (with very rare exceptions) anytime other than = take off and landing, and because flap operating speed is far below = cruise, I chose not to have a switch on the stick where inadvertent = operation might occur. My flap switch is just above and to the left of = my throttle knob, on the lower right corner of the left panel, where it = is handy to my right hand during take off and landing. =20 Carl Lewis Legacy L2K-203 N14CL=20 ________________________________ From: Lancair Mailing List on behalf of Laznicka, Garry [MCCUS] Sent: Thu 7/5/2007 6:44 AM To: lml@lancaironline.net Subject: [LML] Flap Switch Flap Switch I am building L-360 and currently working on a panel and flap system. = Could you please let me know the most suitable switch for flap = operation. I will place my switch on the bottom right of off avionics' = stack. I am not sure if I should use "on-off-momentary" or = "momentary-off-momentary" flap switch. Also I am considering putting = this switch on the side of Infinity stick, perhaps. Thank you in advance = for your comments. Regards, Garry V. Laznicka L-360MK-IIc -- For archives and unsub = http://mail.lancaironline.net:81/lists/lml/List.html