X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Thu, 28 Jun 2007 19:22:47 -0400 Message-ID: X-Original-Return-Path: Received: from imo-m27.mx.aol.com ([64.12.137.8] verified) by logan.com (CommuniGate Pro SMTP 5.1.10) with ESMTP id 2145207 for lml@lancaironline.net; Thu, 28 Jun 2007 07:24:40 -0400 Received-SPF: pass receiver=logan.com; client-ip=64.12.137.8; envelope-from=MikeEasley@aol.com Received: from MikeEasley@aol.com by imo-m27.mx.aol.com (mail_out_v38_r9.2.) id q.ccb.12da0b51 (29672) for ; Thu, 28 Jun 2007 07:23:52 -0400 (EDT) From: MikeEasley@aol.com X-Original-Message-ID: X-Original-Date: Thu, 28 Jun 2007 07:23:52 EDT Subject: Re: [LML] Re: Throttle/ Prop / Mix Cable Placement X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1183029832" X-Mailer: 9.0 Security Edition for Windows sub 5365 X-Spam-Flag: NO -------------------------------1183029832 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Rick, Another point, the brackets that were included with my ES cable kit, 2 out of 3 were wrong. The mixture bracket was the "old" version and I had to get Lancair to send me a new one. The throttle bracket was for the "G" engine and was about 1 1/4" too long (or short, can't remember) so I had to drill new holes in it to get proper alignment. That was 3 years ago so I'm hoping they've taken care of the problem and now supply the correct brackets. You are working with a TSIO so you might have different brackets. Mike ************************************** See what's free at http://www.aol.com. -------------------------------1183029832 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
Rick,
 
Another point, the brackets that were included with my ES cable kit, 2=20= out=20 of 3 were wrong.  The mixture bracket was the "old" version and I had t= o=20 get Lancair to send me a new one.  The throttle bracket was for the "G"= =20 engine and was about 1 1/4" too long (or short, can't remember) so I had to=20 drill new holes in it to get proper alignment.  That was 3 years ago so= I'm=20 hoping they've taken care of the problem and now supply the correct=20 brackets.  You are working with a TSIO so you might have different=20 brackets.
 
Mike



See what's free=20= at AOL.com.
-------------------------------1183029832--