lml@lancaironline.net Mailing List Archive

Chris,

I am on the road this week but I will dig out the Oildyne schematic when I get back. There is a picture already in the archives (I think from Scott) showing the entire assembly broken down on a white cloth where the details of orientation are easier to see. This is what I used and confirmed with the schematic. In any case, the schematic will be posted.

Mark Quinn

Lancair 360c

-----Original Message-----
From: Christopher.Zavatson@baesystems.com
To: lml@lancaironline.net
Sent: Wed, 8 Nov 2006 9:20 PM
Subject: [LML] Re: L-360 Hydraulic System

Mark,

<< This is the identical situation I encountered last year. Oildyne people were wonderful to work with and told me about the hole in the spool valve orientation. However, when they sent me the schematic, it showed the spool pointing the other direction. I reinstalled mine based on the schematic and it has functioned correctly since then. There are a number of postings in the archives with actual pictures of the parts from the disassembled units which agree with the schematic and not the verbal instructions from Oildyne.>>

Thanks for the input. My contact at Oildyne has long since moved on, so continuity has suffered. Do you have a copy of the schematic you could post for archiving?

Chris

Chris Zavatson

N91CZ

360std

www.N91CZ.com

Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.