Return-Path: <lancair.list-request@olsusa.com>
Received: from marvkaye.olsusa.com ([205.245.9.75]) by truman.olsusa.com
          (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35)
          with SMTP id com for <lancair.list@olsusa.com>;
          Sun, 17 Oct 1999 12:02:51 -0400
Message-Id: <3.0.3.32.19991017120750.00b3fa10@olsusa.com>
Date: Sun, 17 Oct 1999 12:07:50 -0400
To: lancair.list@olsusa.com
From: Marvin Kaye <marvkaye@olsusa.com>
Subject: Re: Lancair 360 Header Tank Installation
In-Reply-To: <3809EE85.A82@erols.com>
References: <19991016042324.AAA28125@truman.olsusa.com>
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
An addendum to Bill Harrelson's suggested header tank mounting method
(which sounded excellent to me... I know, I rebuilt my entire header tank
and redid most of the flanges as well) is that you not forget that the
exterior of the header is done in gel-coat, and it's necessary for you to
sand all the way through it and down to the glass itself to establish a
proper bond for your BID attachments.  I'm pretty sure this is mentioned in
the manual, but I thought that a gentle reminder was in order in this case.
 Thanks...

   <Marv>


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/Users/Mkaye/maillist.html