Mailing List lml@lancaironline.net Message #36032
From: Rod Pharis <rpharis@teamimc.com>
Sender: <marv@lancaironline.net>
Subject: RE: [LML] Re: Wanted
Date: Sun, 21 May 2006 13:24:57 -0400
To: <lml@lancaironline.net>
Hi John,
 
I am interested, depending upon how much you are asking for it of course.  I agree that I should assume rebuilding it, and will investigate the cost of the parts to do the rebuild.
 
Regarding the hardener system retrofit kit, what material is used to replace the steel parts?
 
Rod
 
 
-----Original Message-----
From: Lancair Mailing List [mailto:lml@lancaironline.net]On Behalf Of JPKleber@aol.com
Sent: Saturday, May 20, 2006 2:31 PM
To: Lancair Mailing List
Subject: [LML] Re: Wanted

In a message dated 5/17/2006 3:43:02 PM Mountain Daylight Time, rpharis@teamimc.com writes:
I would like to purchase an epoxy pump for 100:25 (4:1) ratio mix, in
good condition.
Hi Rod,
 
I have a pump (4:1 ratio) purchased from Lancair 5 years ago to build my Legacy.  I no longer need the pump and am willing to sell it.  Two things to consider though:
 
    1.  After 5 years of use, the pump may need a rebuild in the future.  Right now it's in good condition and does not demonstrate any symptoms of needing to be rebuilt.  Rebuild kits are available from Michael Engineering, but I don't know the cost --- my guess is minimal.
 
    2. The pump is standard.  There is a retro fit kit to eliminate steel parts in the hardener delivery system.  I recommend installing this kit.  Cost is about $30.00
 
If this is what you're looking for, please contact me at:
 
 
or my cell phone: 303-246-6992
 
Thanks,
John Kleber
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster