Mailing List lml@lancaironline.net Message #35349
From: Ron Raby <ronr@advanceddesign.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] ES vertical stab problem during construction
Date: Fri, 21 Apr 2006 21:54:25 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Leon

I think you should rebuild it. I would call Lancair and find out how to take this apart without damaging the parts. I would also suggest that you join the ES group at:

Lancair_ES@YahooGroups.com

Regards

Ron Raby

ES 163

----- Original Message ----- From: "Marvin Kaye" <marv@lancaironline.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Friday, April 21, 2006 10:29 AM
Subject: [LML] ES vertical stab problem during construction



 Dear fellow builders
 I am building an ES and have got into a problem. I have closed the vertical
 stabilizer and found out afterwards the L.E. was not on the centerline.
 Diff. on the worst is allmost 3/4 inch.  I have sendt a mail to Lancair
 tech, but have no response. I would solve the problem by filling up with
 micro and lay 1 BID on top. How does that sound?
 Leon Moeller
 Denmark
 Lancair ES

--
For archives and unsub http://mail.lancaironline.net/lists/lml/
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster