Sender: <marv@lancaironline.net>
To: lml@lancaironline.net
Date: Fri, 21 Apr 2006 21:54:25 -0400
Message-ID: <redirect-1076220@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=206.152.180.11; envelope-from=ronr@advanceddesign.com
From: "Ron Raby" <ronr@advanceddesign.com>
References: <list-1075568@logan.com>
Subject: Re: [LML] ES vertical stab problem during construction
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=response
Content-Transfer-Encoding: 7bit

Leon

I think you should rebuild it. I would call Lancair and find out how to take 
this apart without damaging the parts. I would also suggest that you join 
the ES group at:

Lancair_ES@YahooGroups.com

Regards

Ron Raby

ES 163

----- Original Message ----- 
From: "Marvin Kaye" <marv@lancaironline.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Friday, April 21, 2006 10:29 AM
Subject: [LML] ES vertical stab problem during construction


>
>  Dear fellow builders
>  I am building an ES and have got into a problem. I have closed the 
> vertical
>  stabilizer and found out afterwards the L.E. was not on the centerline.
>  Diff. on the worst is allmost 3/4 inch.  I have sendt a mail to Lancair
>  tech, but have no response. I would solve the problem by filling up with
>  micro and lay 1 BID on top. How does that sound?
>  Leon Moeller
>  Denmark
>  Lancair ES
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>
>