X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Sender: To: lml@lancaironline.net Date: Mon, 03 Apr 2006 15:17:23 -0400 Message-ID: X-Original-Return-Path: Received: from colossus.formysite.com ([64.58.34.10] verified) by logan.com (CommuniGate Pro SMTP 5.0.9) with ESMTPS id 1056726 for lml@lancaironline.net; Mon, 03 Apr 2006 10:00:42 -0400 Received-SPF: none receiver=logan.com; client-ip=64.58.34.10; envelope-from=genemartin@enid.com Received: from yolanda (ip-216.226.6.222.formysite.com [216.226.6.222] (may be forged)) by colossus.formysite.com (8.12.8/8.12.8) with SMTP id k33Dxq15026199 for ; Mon, 3 Apr 2006 08:59:53 -0500 X-Original-Message-ID: <002001c65726$e81d5cd0$6501a8c0@yolanda> From: "Gene Martin" X-Original-To: "Lancair Mailing List" Subject: Flap Motor Failure 320 X-Original-Date: Mon, 3 Apr 2006 09:00:02 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001D_01C656FC.FE483450" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 This is a multi-part message in MIME format. ------=_NextPart_000_001D_01C656FC.FE483450 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Flew out for breakfast sat. morning when prepping to leave raising flaps = to aprox 2" down I passed my spot then could not get them to move = down,went up more and they seemed to coast, still no down,more up and = they were stuck in full up position.Flew home and started tear = down,flaps were jammed in reflex(about3/4")so hard I could not remove = the pin on the flap motor clevis end,disconnected flap push rods and = press. was relieved enough to remove pin and then motor asm.all seems to = work well on test but seems to coast about 1/2" when power is = removed,these motors are supposed to stop immediately I believe.Still = doesn't explain why it would not move flaps down even before they were = jammed in up position?removed motor gears all look good anybody know if = you can buy the motor separately. THANKS Gene Martin LNC2/320 N522RG 239hr. ------=_NextPart_000_001D_01C656FC.FE483450 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Flew out for breakfast sat. morning = when prepping=20 to leave raising flaps to aprox 2" down I passed my spot then could not = get them=20 to move down,went up more and they seemed to coast, still no down,more = up and=20 they were stuck in full up position.Flew home and started tear = down,flaps were=20 jammed in reflex(about3/4")so hard I could not remove the pin on the = flap motor=20 clevis end,disconnected flap push rods and press. was relieved enough to = remove=20 pin and then motor asm.all seems to work well on test but seems to coast = about=20 1/2" when power is removed,these motors are supposed to stop immediately = I=20 believe.Still doesn't explain why it would not move flaps down even = before they=20 were jammed in up position?removed motor gears all look good anybody = know if you=20 can buy the motor separately.

THANKS Gene Martin

LNC2/320 N522RG

239hr.

------=_NextPart_000_001D_01C656FC.FE483450--