Return-Path: Received: from imo29.mx.aol.com ([198.81.17.73]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Tue, 14 Sep 1999 01:31:12 -0400 Received: from Fredmoreno@aol.com by imo29.mx.aol.com (mail_out_v22.4.) id kUMSa01989 (3963); Tue, 14 Sep 1999 01:34:58 -0400 (EDT) From: Fredmoreno@aol.com Message-ID: <20b42520.250f3882@aol.com> Date: Tue, 14 Sep 1999 01:34:58 EDT Subject: Polyethylene skid plate - Lancair IV To: TByrnes133@aol.com, lancair.list@olsusa.com X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I used no glue. Just cut it out of the same sheet of 1/4 inch polyethylene I used to surface my cutting table (from a local plastics supplier). You need to start with a piece roughly a foot square, and then cut to fit with a sabre saw. Fred >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html