Return-Path: Received: from olympus.net ([198.133.237.1]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Fri, 10 Sep 1999 13:10:07 -0400 Received: from ptpm062.olympus.net ([198.133.237.92] helo=station4) by olympus.net with smtp (Exim 2.02 #1) id 11PUFF-0001ZV-00 for lancair.list@olsusa.com; Fri, 10 Sep 1999 10:13:54 -0700 Message-ID: <001901befbb0$75cdf3c0$726fdfdf@station4> From: "John Barrett" <2thman@olympus.net> To: "Lancair Mail List" Subject: fuel tank leaks Date: Fri, 10 Sep 1999 10:18:10 -0700 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Shop vac is a great way to put on the vacuum to seal the leak when you know where it comes out on the surface. Also the Jefco 9700 sealer works well for this purpose. Mix up a tablespoon or two and squeegee it over the leaking surface. Turn on the vacuum for about 30 seconds. Turn off vacuum. Wipe away excess. Wait a few hours. Retest for leaks. I had four leaks - they all went away after one application of above process. Regards, John Barrett >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html