Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Sat, 12 Feb 2005 14:49:34 -0500 Message-ID: X-Original-Return-Path: Received: from [216.187.95.42] (HELO webmail.pzinternet.com) by logan.com (CommuniGate Pro SMTP 4.3c1) with SMTP id 726438 for lml@lancaironline.net; Sat, 12 Feb 2005 14:21:50 -0500 Received-SPF: none receiver=logan.com; client-ip=216.187.95.42; envelope-from=gcrodgers@sympatico.ca Received: (qmail 90415 invoked by uid 1014); 12 Feb 2005 19:21:03 -0000 Received: from unknown (HELO computer) (70.20.151.197) by mx10.pzinternet.com with SMTP; 12 Feb 2005 19:21:03 -0000 Reply-To: From: "Gary Rodgers" X-Original-To: "Lancair Mailing List" Subject: door seal X-Original-Date: Sat, 12 Feb 2005 14:20:57 -0500 X-Original-Message-ID: MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0011_01C5110E.119997A0" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.6604 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1478 This is a multi-part message in MIME format. ------=_NextPart_000_0011_01C5110E.119997A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Brent; Actually I wrote that to Craig, The product is 'similar to silicone' in that it is clear and flexible. I am very familiar with silicones and effects with coatings etc Have used silicones in continuous composite production processes, as well as sometimes used as an additive to control certain surface characteristics in UV curable coatings. The product peels of in a continuous strip; doesn't have to be cut off. And because it isn't liquid as a silicone material used as a parting agent/mold release, it isn't absorbed into the primed surface to any significant degree. It also would be a simple matter to lightly sand and re-apply primer if needed. If you go to the link that I supplied for the 'RedDevil' product, and then on to the technical data, the sealant can be painted. GaryR Craig writes: <> ------=_NextPart_000_0011_01C5110E.119997A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Brent;
 
Actually I wrote = that to=20 Craig,
 
The product is = 'similar to=20 silicone' in that it is clear and flexible.  I am very familiar = with=20 silicones and effects with coatings etc  Have used silicones in = continuous=20 composite production processes, as well as sometimes used as an additive = to=20 control certain surface characteristics in UV curable = coatings.  The=20 product peels of in a continuous strip; doesn't have to be cut = off.  And=20 because it isn't liquid as a silicone material used as a parting = agent/mold=20 release, it isn't absorbed into the primed surface to any significant=20 degree.  It also would be a simple matter to lightly sand and = re-apply=20 primer if needed.  If you go to the link that I supplied for the = 'RedDevil'=20 product, and then on to the technical data, the sealant can be=20 painted.
 
GaryR
 
Craig writes:
<<There is a removable type = sealant material=20 that is similar to silicone, but the adhesion isn't as strong that you = may be=20 able to use.
>>

<Good luck painting the door jam = after=20 applying any silicone based material. Jeff has the better idea, paint = the jam=20 first.

Regards
Brent Regan>
------=_NextPart_000_0011_01C5110E.119997A0--