Posted for James Rogers <pt22_02557@yahoo.com>:

 I cannot answer using the reply from outlook express.
 [suggestions, anyone?]

 I have read all of the answers to my question about
 the gear locking in free fall and have disassembled
 the gear components again and all is well to include
 no residual hyd pressure. except for the seals being
 brand new and the GM10 springs having no strength at
 all, I do not know what else it could be. Also the
 inside washer against the springs have cupped and bind
 the springs. It only takes verrry little finger
 pressure to complete the extension on both main gears
 and even then the springs do not push the knuckel into
 the locked position. They are well greased and not
 binding. With the hyd cylinders removed the gear
 swings verrrry smooth. Thanks. Jim@ pt22_02557@yahoo.com