<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Does anyone have a picture of aircraft jacks that are made from a hydraulic
bottle jack welded onto an angle iron stand?  I'm looking to get a welding
friend of mine to make up a pair and it would help tremendously if I had a
picture.  (I'm not a very good artist/draftsman)

Thanks,

Curtis Krouse N753K


[There's a picture of a very nice jackstand on the LML homepage which was
submitted by Jens Jensen.  It's in the Attachments area and dated 11/12/98.
I built one of these things out of about $35 worth of steel in a few
afternoons and am pleased to report that it works great.  I don't have
any shop drawings but your welder friend could probably sketch one out
based on the photo and some dimensions taken from your airplane.  (That's
how I did mine.)  I hope this helps.        <Marv>    ]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML homepage:   http://www.olsusa.com/Users/Mkaye/maillist.html