Return-Path: Sender: "Marvin Kaye" To: lml@lancaironline.net Date: Thu, 09 Dec 2004 19:37:09 -0500 Message-ID: X-Original-Return-Path: Received: from [65.54.247.24] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.2.5) with ESMTP id 561487 for lml@lancaironline.net; Thu, 09 Dec 2004 15:13:53 -0500 Received-SPF: pass receiver=logan.com; client-ip=65.54.247.24; envelope-from=bakercdb@hotmail.com Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Thu, 9 Dec 2004 12:13:21 -0800 X-Original-Message-ID: Received: from 217.206.150.162 by by2fd.bay2.hotmail.msn.com with HTTP; Thu, 09 Dec 2004 20:12:27 GMT X-Originating-IP: [217.206.150.162] X-Originating-Email: [bakercdb@hotmail.com] X-Sender: bakercdb@hotmail.com In-Reply-To: From: "Clark Baker" X-Original-To: lml@lancaironline.net X-Original-Bcc: Subject: RE: [LML] Re: Legacy Instrument Panel, Panel Lettering X-Original-Date: Thu, 09 Dec 2004 15:12:27 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed X-OriginalArrivalTime: 09 Dec 2004 20:13:21.0327 (UTC) FILETIME=[879B2BF0:01C4DE2B] Mailing List lml@lancaironline.net Message #13206 From: "cbaker9" Sender: (Marvin Kaye) Subject: Instrument Panel Labels Date: Mon, 06 May 2002 11:33:37 -0400 To: lml Over the last year I made several changes and additions to my silk screened instrument panel and needed to add some additional labels. I found a company that made up a sheet of custom dry transfer labels. I applied them and misted on several light coats of clear coat. It matched the original silkscreen quite well (see: WTHR, #2 ATT GYRO, and BOOST in the attached picture). The company that did the transfers is Bob Rumer at Gallery Graphics in Georgia, gallerygraphics@mac.com (770) 842-5010. The cost was about $70 for a couple of 3x5” sheets of transfers. Be sure to get duplicates for the inevitable mistakes (you can scrape off misapplied labels before they are burnished and clear coated). I did my labels in MS Word for Windows, but had to convert it to a .pdf file because Bob’s Mac software couldn’t read the latest version of Word for Windows. Regards, Clark Baker Attachment: P1010005.jpg (58Kbytes) Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster Reply >From: "Skip Slater" >Reply-To: "Lancair Mailing List" >To: "Lancair Mailing List" >Subject: [LML] Re: Legacy Instrument Panel, Panel Lettering >Date: Thu, 09 Dec 2004 11:11:34 -0500 > >Mike, > While I had the lettering silk screened on my powder coated panel >surface, I've added or changed a couple of things over time and would like >to find a good transfer lettering source to label them. Can you tell me >where you had yours done? > Skip Slater