Return-Path: Received: from kestrel.solect.com ([198.235.53.26]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sat, 12 Jun 1999 19:02:38 -0400 Received: from solect.com ([24.226.90.173]) by solect.com (8.8.8+Sun/8.8.8) with ESMTP id TAA03352 for ; Sat, 12 Jun 1999 19:05:01 -0400 (EDT) Message-ID: <3762E7AB.4069EEC5@solect.com> Date: Sat, 12 Jun 1999 19:05:15 -0400 From: James Detenbeck To: "lancair.list@olsusa.com" Subject: Peel Ply X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I have three examples of Peel ply: 1) The stuff that was obvious on my kit (like dacron cloth, with a black stripe every few inches) 2) The stuff I use (That's pretty easy to identify), green and easy to spot 3) Areas that appear to be free of peel ply but look like the cloth has left an impression. Can't peel it, cant lift a corner, etc. The question is, in areas like # 3 that do't peel away, but where it looks like it could be peel ply, is there a way to check without being destructive? Is there any guarantee that the peel ply used at the factory has the stripe in it? James >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html