Return-Path: <marv@lancaironline.net>
Sender: <marv@lancaironline.net> (Marvin Kaye)
To: lml@lancaironline.net
Date: Fri, 23 Jul 2004 10:06:44 -0400
Message-ID: <redirect-331601@logan.com>
X-Original-Return-Path: <glcasey@adelphia.net>
Received: from mta13.adelphia.net ([68.168.78.44] verified)
  by logan.com (CommuniGate Pro SMTP 4.2b8)
  with ESMTP id 331557 for lml@lancaironline.net; Fri, 23 Jul 2004 09:29:12 -0400
Received-SPF: pass
 receiver=logan.com; client-ip=68.168.78.44; envelope-from=glcasey@adelphia.net
Received: from worldwinds ([68.66.218.156]) by mta13.adelphia.net
          (InterMail vM.6.01.03.02 201-2131-111-104-20040324) with SMTP
          id <20040723132841.GZRF28609.mta13.adelphia.net@worldwinds>
          for <lml@lancaironline.net>; Fri, 23 Jul 2004 09:28:41 -0400
From: "Gary Casey" <glcasey@adelphia.net>
X-Original-To: "lancair list" <lml@lancaironline.net>
Subject: Hinge pin alignment
X-Original-Date: Fri, 23 Jul 2004 06:24:30 -0700
X-Original-Message-ID: <NEBBIBKBKLGPNKKOGMMBEENEFMAB.glcasey@adelphia.net>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="Windows-1252"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106

<<Additionally, the rudder sits on three "hinge pins" .  The hinge
pins are mounted to phenolic block on the vertical stabilizer.  This was all
done in the Philippines.  Only 2 of my 3 hinge pins line up to accept the
bolts.>>

On my ES I had to reset hinge brackets on about 5 out of the 7 control
surfaces.  I assume that since the hinges were installed with the structure
open something moved slightly when it was closed.  It was not a big deal,
but did take time.  It might have been better if they had only bedded in the
two end points and left the center one to be done by the builder.  It would
have saved me time.

Gary Casey
ES #157