Return-Path: Sender: (Marvin Kaye) To: lml@lancaironline.net Date: Thu, 22 Apr 2004 11:43:05 -0400 Message-ID: X-Original-Return-Path: Received: from [207.254.33.66] (HELO DEWEY2.Cadwell.cadwell.com) by logan.com (CommuniGate Pro SMTP 4.2b2) with ESMTP id 3184603 for lml@lancaironline.net; Thu, 22 Apr 2004 11:28:29 -0400 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Subject: Strange Anomaly in EGT X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0 X-Original-Date: Thu, 22 Apr 2004 08:32:18 -0700 X-Original-Message-ID: <63D0A1D8F168684F8502C4B8A229D79116916A@DEWEY2.Cadwell.cadwell.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Strange Anomaly in EGT Thread-Index: AcQoDLkLX4Qlil6WTHmm6waSMC/V/wAZUM+Q From: "Carl Cadwell" X-Original-To: "Lancair Mailing List" 1 hour 20 minutes into the flight. A 40 second blip. All 4 cylinders showed the same response. =20 Guesses:=20 1. I assume that you are running lean of peak. You are up high. You changed tanks. There is vapor in the fuel line on the tank side of the fuel selector valve. The fuel there is warmer from being in the cabin and atmospheric (low) pressure in the fuel tanks resulting in some fuel being vaporized. As the vapor went through the fuel system, you went leaner from the vapor and the EGT fell. I have no guess why it rebounded above the baseline. Something caused the engine to meter fuel slightly richer than baseline. 2. Fuel contamination, running LOP, will cause a blip down in EGT and then return to baseline. I am not sure that it would over shoot. Again, this probably came after switching fuel tanks with a drop of water that ran through. 3. If you are running rich of peak, then ask again what caused the fuel system to meter more fuel to the cylinders and then less. Would changing tanks cause a momentary increase in fuel pressure and then a momentary drop? I doubt it, just asking the question. This would be easy to test, switch tanks several times and then look at the results. 4. If none of these fit, ask if there was a sampling error in the system? Not likely, just ask the question and watch in the future. Disclaimer: Not an engineer, just a guy who likes to solve mysteries for greater understanding. Carl Cadwell N25CL IVP