Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 14 Apr 2004 19:35:30 -0400 Message-ID: X-Original-Return-Path: X-ExtScanner: Niversoft's Find_Attachments X-SpamCatcher-Score: 2 [X] Received: from imo-m27.mx.aol.com ([64.12.137.8] verified) by logan.com (CommuniGate Pro SMTP 4.2b2) with ESMTP id 3163956 for marv@lancaironline.net; Tue, 13 Apr 2004 03:30:31 -0400 Received: from JAVoda@aol.com by imo-m27.mx.aol.com (mail_out_v37_r1.2.) id q.6.265c613c (2168) for ; Tue, 13 Apr 2004 03:30:22 -0400 (EDT) From: JAVoda@aol.com X-Original-Message-ID: <6.265c613c.2dacf10e@aol.com> X-Original-Date: Tue, 13 Apr 2004 03:30:22 EDT Subject: Fwd: Peel ply from factory cowl X-Original-To: marv@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="part1_6.265c613c.2dacf10e_boundary" X-Mailer: 8.0 for Windows sub 6803 --part1_6.265c613c.2dacf10e_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit --part1_6.265c613c.2dacf10e_boundary Content-Type: message/rfc822 Content-Disposition: inline Return-path: From: JAVoda@aol.com Full-name: JAVoda Message-ID: Date: Sun, 11 Apr 2004 17:45:20 EDT Subject: Peel ply from factory cowl To: marvkaye@olsusa.com MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part2_6.265c613c.2dab1670_boundary" X-Mailer: 8.0 for Windows sub 6803 --part2_6.265c613c.2dab1670_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am trying to take the peel ply from the inside of the cowl and I am having great difficulty. The material has ridges and breaks off at each ridge. It only comes off in small pieces and I have to start a new strip with a exacto knife. I did call the factory and they said to use heat from a hair dryer; did and then used the heat gun with no results. Also tried using acetone with the same results. Is there any other ideas to make this process less painful? John Voda IV-P 40% --part2_6.265c613c.2dab1670_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable I am trying to take the peel ply fr= om the inside of the cowl and I am having great difficulty.  The materi= al has ridges and breaks off at each ridge. It only comes off in small piece= s and I have to start a new strip with a exacto knife.  I did call the=20= factory and they said to use heat from a hair dryer; did and then used the h= eat gun with no results.  Also tried using acetone with the same result= s. 

Is there any other ideas to make this process less painful?

John Voda
IV-P 40% --part2_6.265c613c.2dab1670_boundary-- --part1_6.265c613c.2dacf10e_boundary--