Posted for "Dave Saylor" <Dave@AirCraftersLLC.com>:

Bob,

Make sure you don't have a leak across the dump valve or through an
actuator.  Actuators can leak from the high to the low side causing the pump
to stay on.  Vern has a new heavier dump valve than was originally supplied
with many kits.

Dave Saylor
AirCrafters LLC
831-722-9141


 > > With the advent of cooler weather, the hydraulic pump in my LNC2 frequently
wants to stay ON even after the gear is fully retracted.  Turning power off
to the gear relays will stop the pump.  < <