From: N360GT@aol.com
Message-ID: <730a67f4.3701b07f@aol.com>
Date: Wed, 31 Mar 1999 00:19:59 EST
To: lancair.list@olsusa.com
Subject: Aileron Idler arms
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Curtis,

I too got the hardware kit and I set mine up with the blueprint.  It will
match but there
are quite a few combinations that you can come up with.  Some times turning a
bracket around (front to rear) will change the alignment.  With the double
bearings be sure and put a bolt thru the center with a nut and take you time
checking the free rotation often. It should rotate with no effort.

Good luck and keep building
Gary Martin
N360TG