Return-Path: Sender: (Marvin Kaye) To: lml Date: Fri, 12 Sep 2003 12:59:45 -0400 Message-ID: X-Original-Return-Path: Received: from imo-r03.mx.aol.com ([152.163.225.99] verified) by logan.com (CommuniGate Pro SMTP 4.1.3) with ESMTP id 2577085 for lml@lancaironline.net; Fri, 12 Sep 2003 10:54:03 -0400 Received: from Sky2high@aol.com by imo-r03.mx.aol.com (mail_out_v36_r1.1.) id q.46.3ddf6470 (4410) for ; Fri, 12 Sep 2003 10:53:58 -0400 (EDT) From: Sky2high@aol.com X-Original-Message-ID: <46.3ddf6470.2c933806@aol.com> X-Original-Date: Fri, 12 Sep 2003 10:53:58 EDT Subject: Re: [LML] Re: LNC2: sagging motor mounts X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="-----------------------------1063378438" X-Mailer: 9.0 for Windows sub 1030 -------------------------------1063378438 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit In a message dated 9/12/2003 9:24:23 AM Central Daylight Time, marv@lancaironline.net writes: When all is done, retorque to 15 INCH-POUNDS. The normal engine mount........ Don, et al, Yikes! If I remember correctly, these are AN bolts 7/16-20 that have a torque range of at least 38-42 FOOT POUNDS. If they are 1/2-20 the range is 40-57.5 FOOT POUNDS. Check the bolt size and an appropriate torque chart when these are tightened down. Scott Krueger Sky2high@aol.com II-P N92EX IO320 Aurora, IL (KARR) PS: the best washers are those cut off of the old mounts - just the right diameter. -------------------------------1063378438 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable
In a message dated 9/12/2003 9:24:23 AM Central Daylight Time, marv@lan= caironline.net writes:
When all
is done, retorque to 15 INCH-POUN= DS.  The normal engine mount........
Don, et al,
 
Yikes! If I remember correctly, these are AN bolts 7/16-20 that have a=20= torque range of at least 38-42 FOOT POUNDS.  If they are 1/2-20 the ran= ge is 40-57.5 FOOT POUNDS.
 
Check the bolt size and an appropriate torque chart when these are tigh= tened down. 
 
Scott Krueger
Sky2high@aol.com
II-P N92EX IO320 Aurora, IL (KARR)
 
PS: the best washers are those cut off of the old mounts - just the rig= ht diameter.
-------------------------------1063378438--