Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 01 Apr 2003 23:27:28 -0500 Message-ID: X-Original-Return-Path: Received: from [64.4.33.147] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.1b2) with ESMTP id 2101305 for lml@lancaironline.net; Tue, 01 Apr 2003 22:19:08 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Tue, 1 Apr 2003 19:19:07 -0800 Received: from 63.10.224.150 by oe154.pav0.hotmail.com with DAV; Wed, 02 Apr 2003 03:19:07 +0000 X-Originating-IP: [63.10.224.150] X-Originating-Email: [mrsrb1@msn.com] From: "Richard Eddinger" X-Original-To: "Lancair Mailing List" Subject: Nose gear hyd cyl X-Original-Date: Tue, 1 Apr 2003 19:19:55 -0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000B_01C2F883.ADA6F700" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: MSN Mail 8.00.0022.3100 X-MimeOLE: Produced By Microsoft MimeOLE V8.00.0022.3100 X-Original-Message-ID: X-OriginalArrivalTime: 02 Apr 2003 03:19:07.0394 (UTC) FILETIME=[9EF62620:01C2F8C6] This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C2F883.ADA6F700 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable A week or so ago I remember some one having a problem with the nose gear = actuating cylinder not being the correct length or would not mount up to = the top of the wheel well to the phenolic insert on a 360 quick build = kit. I must tell on my self after measuring everything up for a couple = of days I found the nerve to mount the drag link and hook up the retract = cylinder. It would not even come close to hitting the block so I could = mount it. After a call to a 360 builder near me and a couple of calls to = Lancair and bothering poor Dan I happen to take a look and the two = remaining cylinders. They were different size one was about 1 1/2 inches = shorter than the other. I'LL be darned, that short one fit just like it = was supposed to CONNECTED UP PERFECT.=20 DICK & NANCY mrsrb1@msn.com ------=_NextPart_000_000B_01C2F883.ADA6F700 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
A week or so ago I remember some one having a problem with the nose = gear=20 actuating cylinder not being the correct length or would not mount up to = the top=20 of the wheel well to the phenolic insert on a 360 quick build kit. = I must=20 tell on my self after measuring everything up for a couple of = days I found=20 the nerve to mount the drag link and hook up the retract cylinder. It = would not=20 even come close to hitting the block so I could mount it. After a call = to a 360=20 builder near me and a couple of calls to Lancair and bothering poor = Dan I happen to take a look and the two remaining cylinders. = They were=20 different size one was about 1 1/2 inches shorter than the other. I'LL = be=20 darned, that short one fit just like it was supposed to CONNECTED = UP=20 PERFECT. 
DICK & NANCY  mrsrb1@msn.com
= ------=_NextPart_000_000B_01C2F883.ADA6F700--