Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 26 Dec 2002 09:39:45 -0500 Message-ID: X-Original-Return-Path: Received: from toole.uol.com.br ([200.221.4.26] verified) by logan.com (CommuniGate Pro SMTP 4.0.2) with ESMTP id 1934699 for lml@lancaironline.net; Thu, 26 Dec 2002 08:16:23 -0500 Received: from laptop ([200.245.8.97]) by toole.uol.com.br (8.9.1/8.9.1) with SMTP id LAA11885 for ; Thu, 26 Dec 2002 11:09:56 -0200 (BRST) X-Original-Message-ID: <002601c2ace1$0f269100$03030381@laptop> From: "Silvio Novelli" X-Original-To: "Lancair Mailing List" Subject: [LML] L320 shroud X-Original-Date: Thu, 26 Dec 2002 11:12:12 -0200 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001D_01C2ACCF.A40FC5A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 This is a multi-part message in MIME format. ------=_NextPart_000_001D_01C2ACCF.A40FC5A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable The shrouds, top and bottom, I received with the kit was made on = polyester resin (not good) and covered with primer (gel??) coat (worst). = These parts are really very far from the high quality of all the other = parts supplied with the kit. I will have to modify the lower shroud in order to fit the engine, an = IO-320 with bottom mounted injector and also to procedure with some = adjustments on the flange to the firewall. I have two question: Do I have to take special procedures to bond with Hysol or epoxy resin = on polyester parts?=20 Removing all that primer coat represents a lot of sanding ours and a lot = of dust. The coat is so deep in the fiber that I have found two = situations: or I do not remove all the coat or I will damage the fiber. = Both alternatives are not acceptable. Suggestions and ideas, please. Silvio Novelli L320 70%. ------=_NextPart_000_001D_01C2ACCF.A40FC5A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
The shrouds, top and=20 bottom, I received with the kit was made on polyester resin (not good) = and=20 covered with primer (gel??) coat (worst). These parts are really very = far from=20 the high quality of all the other parts supplied with the=20 kit.
 
I will have to = modify the=20 lower shroud in order to fit the engine, an IO-320 with bottom = mounted=20 injector and also to procedure with some adjustments on the flange to = the=20 firewall. I have two question:
 
Do I have to = take special=20 procedures to bond with Hysol or epoxy resin on polyester parts?=20
 
Removing all = that primer coat=20 represents a lot of sanding ours and a lot of dust. The coat is so deep = in the=20 fiber that I have found two situations: or I do not remove all the coat = or I=20 will damage the fiber. Both alternatives are not acceptable.=20 Suggestions and ideas, please.
 
Silvio Novelli = L320=20 70%.
------=_NextPart_000_001D_01C2ACCF.A40FC5A0--