Return-Path: Sender: (Marvin Kaye) To: lml Date: Wed, 23 Oct 2002 19:54:07 -0400 Message-ID: X-Original-Return-Path: Received: from imo-r06.mx.aol.com ([152.163.225.102] verified) by logan.com (CommuniGate Pro SMTP 4.0) with ESMTP id 1843566 for lml@lancaironline.net; Wed, 23 Oct 2002 19:44:01 -0400 Received: from Sky2high@aol.com by imo-r06.mx.aol.com (mail_out_v34.13.) id q.12c.19aed66b (4328) for ; Wed, 23 Oct 2002 19:43:47 -0400 (EDT) From: Sky2high@aol.com X-Original-Message-ID: <12c.19aed66b.2ae88e32@aol.com> X-Original-Date: Wed, 23 Oct 2002 19:43:46 EDT Subject: Re: [LML] NEED bldrs. manual pages for RUDDER INSTALLATION & REMOVAL FOR 320 X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_12c.19aed66b.2ae88e32_boundary" X-Mailer: AOL 8.0 for Windows US sub 230 --part1_12c.19aed66b.2ae88e32_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Tom, The rudder has a threaded tube at the bottom that is safetied to the fiberglass. Cut the safety and unscrew the tube. retain the washer - it is important. Then, lift the rudder about 1 inch and move it aft off the pivots. Re-install is the reverse - hang the rudder on the pivots, put a washer on the protruding bottom bolt and screw on the tube. Make sure you safety the tube. Make sure you use a washer to protect from a rudder/ground strike from driving out the bushing in the tail post. Scott Krueger N92EX --part1_12c.19aed66b.2ae88e32_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit Tom,

The rudder has a threaded tube at the bottom that is safetied to the fiberglass.  Cut the safety and unscrew the tube.  retain the washer - it is important.  Then, lift the rudder about 1 inch and move it aft off the pivots.

Re-install is the reverse - hang the rudder on the pivots, put a washer on the protruding bottom bolt and screw on the tube.  Make sure you safety the tube.  Make sure you use a washer to protect from a rudder/ground strike from driving out the bushing in the tail post.

Scott Krueger
N92EX
 --part1_12c.19aed66b.2ae88e32_boundary--