<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

          <<  Lancair Builders' Mail List  >>

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

>>

Fra: Mike Boxill <mboxill@online.no>

Message ID: ae0bcc36.36980e0c@aol.com=20

Dato: 10. januar 1999 20:33

Emne: LC20 Middle Gear Door Bracket





Rob,

On my kit the upper two landing gear axle bolt locations on the two gear

leg castings are a mirror image of each other. Both bolt locations were

such that they only accepted the LEFT Mount bracket, Ref. Chapter 6-18,

Figure 6-11. (LC20 Mrk 11).



I also purchased the hardware kit and found that the Lefthand bracket

would be perfect for either side. The Righthand bracket did not fit at

all.



I contacted Lancair requesting a second Lefthand bracket. They did not

admit to a problem and suggested I could still use the Righthand

bracket.  So I used the Righthand bracket after modifying it by drilling

new holes to fit the bolt locations on the righthand gear leg,

positioning it to enable correct location of the middle gear door.



Mike