Return-Path: Received: from online.no (pilt-s.online.no [148.122.208.18]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sun, 10 Jan 1999 14:47:26 -0500 Received: from default (ti18a22-0041.dialup.online.no [130.67.225.41]) by online.no (8.9.1/8.9.1) with SMTP id UAA10025 for ; Sun, 10 Jan 1999 20:48:44 +0100 (MET) Message-ID: <004c01be3cd1$d50d4280$74e24382@default> From: "Mike Boxill" To: "List Lancair" Subject: VS: LC20 Middle Gear Door Bracket Date: Sun, 10 Jan 1999 20:45:46 +0100 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Fra: Mike Boxill Message ID: ae0bcc36.36980e0c@aol.com=20 Dato: 10. januar 1999 20:33 Emne: LC20 Middle Gear Door Bracket Rob, On my kit the upper two landing gear axle bolt locations on the two gear leg castings are a mirror image of each other. Both bolt locations were such that they only accepted the LEFT Mount bracket, Ref. Chapter 6-18, Figure 6-11. (LC20 Mrk 11). I also purchased the hardware kit and found that the Lefthand bracket would be perfect for either side. The Righthand bracket did not fit at all. I contacted Lancair requesting a second Lefthand bracket. They did not admit to a problem and suggested I could still use the Righthand bracket. So I used the Righthand bracket after modifying it by drilling new holes to fit the bolt locations on the righthand gear leg, positioning it to enable correct location of the middle gear door. Mike