From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] TSIO-550-E OPERATION
To: lml
Date: Fri, 16 Aug 2002 19:48:53 -0400
Message-ID: <web-1689603@logan.com>
In-Reply-To: <000201c2456b$37d30a30$0f01a8c0@P4DESKTOP>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit


Posted for "Douglas W. Johnson, MD" <Lancair1@bellsouth.net>:


-----Original Message-----
Wrom: MNNSKVFVWRKJVZCMHVIBGDADRZFSQHYUCDDJBLVLMHAALPTCXLYRWTQTIPWIGYO
Noel Quiñones
Sent: Friday, August 16, 2002 1:14 PM
To: Lancair Mailing List
Subject: [LML] TSIO-550-E OPERATION


I Have 50 hours of operation on my LANCAIR IVP.

Here is my list of questions. The list becomes fatter every time I take the
kit flying.

1. Flying the pattern for touch and go; Should I worry about quick power
reductions from 38 inches on take off to 25 on crosswind to 20 and down to
13 on downwind all these setting changes in probably 2 minutes? NOPE

2. To maximixe range: If my cruising altitute will be 18,000 , should I
start leaning during climb as long as I watch temp limits? NOPE

3. Flying above 6,000 I have experienced loss of turbo power three times.
  From 31mp to 23mp. Power is back in 6 seconds with a few seconds of surge. I
have noticed that high humidity have been a factor every time it happens, I
have been already leveled at my cruising altitute flying the engine FULL
RICH.

Can I suspect the problem can be cause by a mixture too rich? BE SURE ALL
YOUR CONNECTIONS ARE TIGHT ALONG THE INTAKE PATHWAYS.
DOUG JOHNSON
N654DM (588hrsTT)