Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 13 Jun 2002 12:09:32 -0400 Message-ID: X-Original-Return-Path: Received: from imo-d05.mx.aol.com ([205.188.157.37] verified) by logan.com (CommuniGate Pro SMTP 4.0b2) with ESMTP id 1292266 for lml@lancaironline.net; Thu, 13 Jun 2002 11:51:53 -0400 Received: from Billhogarty@aol.com by imo-d05.mx.aol.com (mail_out_v32.5.) id q.145.fe9d095 (25306) for ; Thu, 13 Jun 2002 11:51:47 -0400 (EDT) From: Billhogarty@aol.com X-Original-Message-ID: <145.fe9d095.2a3a1993@aol.com> X-Original-Date: Thu, 13 Jun 2002 11:51:47 EDT Subject: Re: [LML] Re: ES Fusalage bonding X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="part1_145.fe9d095.2a3a1993_boundary" X-Mailer: AOL 7.0 for Windows US sub 10513 --part1_145.fe9d095.2a3a1993_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi Mark: Altho my experience is with a LIV-P, I did everything possible to the top; including glass, door, wiring, center console, paint, seat belt hardpoints, etc. Anything you can accomplish with the top off is about 10 times easier than crawling inside and playing contortionist. I did use nut/bolts in strategic places to insure that the top would go back on exactly in the same place, each time I removed it. After the top was installed and I had to crawl inside to reinforce the top/bottom joint with 3-bid, I was very thankful that most everything else was already finished. Regards, Bill Hogarty LIV-P@91% --part1_145.fe9d095.2a3a1993_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi Mark:

Altho my experience is with a LIV-P, I did everything possible to the top; including glass, door, wiring, center console, paint, seat belt hardpoints, etc.  Anything you can accomplish with the top off is about 10 times easier than crawling inside and playing contortionist.

I did use nut/bolts in strategic places to insure that the top would go back on exactly in the same place, each time I removed it.  After the top was installed and I had to crawl inside to reinforce the top/bottom joint with 3-bid, I was very thankful that most everything else was already finished.

Regards, Bill Hogarty LIV-P@91%
 --part1_145.fe9d095.2a3a1993_boundary--