Return-Path: Sender: (Marvin Kaye) To: lml Date: Sun, 26 May 2002 10:16:23 -0400 Message-ID: X-Original-Return-Path: Received: from [216.0.12.25] (HELO exchange.icosa.net) by logan.com (CommuniGate Pro SMTP 4.0b1) with ESMTP id 1248051 for lml@lancaironline.net; Sun, 26 May 2002 08:02:29 -0400 Received: by EXCHANGE with Internet Mail Service (5.5.2653.19) id ; Sun, 26 May 2002 07:02:22 -0500 X-Original-Message-ID: <519194EBBDF7D2118C6000A0CC412E330FEC58@EXCHANGE> From: Jeffrey Skiba X-Original-To: "'lml@lancaironline.net'" Subject: HELP on sealing Defroster X-Original-Date: Sun, 26 May 2002 07:02:18 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2653.19) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C204AD.2F1788C0" This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C204AD.2F1788C0 Content-Type: text/plain; charset="iso-8859-1" Okay, people I need ideas and thoughts .... I was inspecting my Defroster area closeout ribs on my Legacy and I believe that spots are NOT sealed with the top skin. It is bonded in ... I have the defrost holes on the lip drilled and need to seal the top with something via those holes or some other neat method....Please note that the rest of the skin to the stiffener is fine Bonded great but the top of the two ribs appears weak or gapped. One idea I have is to get that "great foam stuff" that expands as it shoots trough the dispensing tube. But I do not know if there are bad effects with that and carbon fiber or the amount of heat that would be put on it via the heat muff air... Speaking of any body know what temp heat muff air gets to in degrees other than HOT??? Any ideas are VERY welcome ... Thanks and have a GREAT holiday Weekend Jeff Legacy builder. ------_=_NextPart_001_01C204AD.2F1788C0 Content-Type: text/html; charset="iso-8859-1"
Okay,  people I need ideas and thoughts ....
 
I was inspecting my Defroster area closeout ribs on my Legacy and I believe that spots are NOT sealed with the top skin. 
 
It is bonded in ...
 
I have the defrost holes on the lip drilled and need to seal the top with something via those holes or some other neat method....Please note that the rest of the skin to the stiffener is fine Bonded great but the top of the two ribs appears weak or gapped.
 
One idea I have is to get that "great foam stuff" that expands as it shoots trough the dispensing tube. But I do not know if there are bad effects with that and carbon fiber or the amount of heat that would be put on it via the heat muff air...
 
Speaking of any body know what temp heat muff air gets to in degrees other than HOT???
 
Any ideas are VERY welcome ...
 
Thanks and have a GREAT holiday Weekend
 
Jeff
 
Legacy builder.
 
 
------_=_NextPart_001_01C204AD.2F1788C0--