<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Bill Bartlett wrote:

>buy one of those big (+-5/8")square full wave rectifiers (They have a
>hole to mount with and heavy lugs) from Radio Shack and hook the + terminals
>to each coil and the other terminal to your transition light. The other
>lug should be grounded. The grounding will keep your relay and switch
>points from arcing.

In reality this is the wrong hookup to get this job done.  To make it work
you must jumper from the switched side of one coil to one of the AC
terminals on the bridge, jumper the other coil switched side to the other
AC terminal on the bridge.  One side of the transit light goes to ground,
the other side of the transit light goes to the + terminal on the bridge.
The - terminal on the bridge also goes to ground.  Now it'll work.

   <Marv>

PS... don't mind the return address, I'm writing from the shop on Cuz's
computer.  It's still me <g>.

    <M>