Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 07 May 2002 23:47:02 -0400 Message-ID: X-Original-Return-Path: Received: from imo-r01.mx.aol.com ([152.163.225.97] verified) by logan.com (CommuniGate Pro SMTP 4.0b1) with ESMTP id 1232099 for lml@lancaironline.net; Tue, 07 May 2002 18:56:26 -0400 Received: from Buzzie88@aol.com by imo-r01.mx.aol.com (mail_out_v32.5.) id q.105.1560384d (3314) for ; Tue, 7 May 2002 18:56:23 -0400 (EDT) From: Buzzie88@aol.com X-Original-Message-ID: <105.1560384d.2a09b597@aol.com> X-Original-Date: Tue, 7 May 2002 18:56:23 EDT Subject: Re: [LML] Cutting table surface X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 7.0 for Windows US sub 10500 Paul, I use flat sheets of polytheylene stock. 1/8" thickness for the glass (off the roll) cutting table and 1/2" thickness for my layup cutting and work table. It comes in 4' x 8' sheets. The stuff cleans up well and has a long life. About $100 per sheet. My supplier in Tulsa is Plastic Supply & Fabrication @ (918) 622-8430. I'm sure Houston has similiar businesses. Buz McAbery ES-156 (75% complete last week, 65% this week) N82BM