Return-Path: Received: from [144.54.3.31] (account ) by logan.com (CommuniGate Pro WebUser 4.0b1) with HTTP id 1231830 for ; Tue, 07 May 2002 14:03:57 -0400 From: "Marvin Kaye" Subject: Re: [LML] Cutting table surface To: lml X-Mailer: CommuniGate Pro Web Mailer v.4.0b1 Date: Tue, 07 May 2002 14:03:57 -0400 Message-ID: In-Reply-To: <1848CABD3587A84DAC6B3F82FE01D9FC01F1F956@jsc-mail08.jsc.nasa.gov> MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format="flowed" Content-Transfer-Encoding: 8bit Posted for "THORN, VALIN B. (JSC-OM) (NASA)" : Paul, We used Polypropylene on our cutting table and wet-out tables. It's soft enough to not dull the cutting blade and doesn't react with acetone for the clean up on the wet table. This is the same material Lancair uses on their cutting and wet-out tables in their build shop. We bought 1/8' thick, 4x8 ft sheets at a big wholesale plastics business north of the Hobby airport. A&C Plastic Products, Inc. 6035 Northdale Houston, TX 77087-5095 Phone: 713.645.4915 or 800.231.4175 Fax: 713.640.2541 Website: www.acplasticsinc.com email: plastic@acplasticsinc.com Item #/400008 = Natural .125/48x96 Polypropylene sheet = $36.44 + tax We've just moved into our permanent hangar at Ellington Field. Come on by some time for a visit. Valin (& Allyson) Legacy Kit 173, Houston, Texas [ to increase the probability your posting will be unedited by the moderator, quote just the relevant line from the org message without using html. -Rob ]