Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 07 May 2002 12:29:38 -0400 Message-ID: X-Original-Return-Path: Received: from [198.207.223.228] (HELO babbler.bmc.com) by logan.com (CommuniGate Pro SMTP 4.0b1) with ESMTP id 1231705 for lml@lancaironline.net; Tue, 07 May 2002 12:18:52 -0400 Received: from localhost.localdomain (localhost [127.0.0.1]) by babbler.bmc.com (8.10.2/8.10.2) with ESMTP id g47GKBd13865 for ; Tue, 7 May 2002 11:20:11 -0500 (CDT) Received: from pdavis.bmc.com (pdavis@localhost) by localhost.localdomain (8.11.6/8.11.2) with ESMTP id g47GGI227349 for ; Tue, 7 May 2002 11:16:18 -0500 X-Original-Message-Id: <200205071616.g47GGI227349@localhost.localdomain> X-Authentication-Warning: localhost.localdomain: pdavis owned process doing -bs X-Mailer: exmh version 2.4 06/23/2000 with nmh-1.0.4 From: pdavis@bmc.com (Paul Davis) Reply-to: pdavis@bmc.com X-Original-To: lml@lancaironline.net (Lancair List) Subject: Cutting table surface Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Original-Date: Tue, 07 May 2002 11:16:18 -0500 What are you folks using for the surfaces of cutting tables? Does the same sort of material work just as well for layup tables or should I use something else for that? I've checked local hardware stores and can't find anything suitable. Most of the materials offered seem too hard. Surely somewhere in the Houston area someone stocks something suitable, but if not I'm willing to mail-order. Thanks Paul Davis INTP pdavis@bmc.com Phone (713)918-1550