Return-Path: <lancair.list-request@olsusa.com>
Received: from marvkaye.olsusa.com ([205.245.9.248]) by truman.olsusa.com
          (Post.Office MTA v3.1.2 release (PO203-101c)
          ID# 0-44819U2500L250S0) with SMTP id AAA2514
          for <lancair.list@olsusa.com>; Sun, 29 Nov 1998 04:38:11 -0500
Message-Id: <3.0.3.32.19981129043504.02ddfecc@olsusa.com>
Date: Sun, 29 Nov 1998 04:35:04 -0500
To: lancair.list@olsusa.com
From: Marvin Kaye <marvkaye@olsusa.com>
Subject: Cutting the SS firewall 
X-Mailing-List: lancair.list@olsusa.com
Mime-Version: 1.0

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
I'm wondering if anyone would share their method of cutting the SS sheet
for the firewall... I don't have a deep throated variable speed band saw so
that's out.  While picking up an engine mount component from the local
welding shop yesterday I asked the owner about it and he said they could do
the job easily with their plasma cutter to rough in the shape and then trim
it to the exact final shape with some kind of fancy shear they have... cost
to get ot done by them is probably about $30 or so.  Alternatives, anyone?

    <Marv>