Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b5) with ESMTP id 925113 for rob@logan.com; Fri, 19 Oct 2001 06:46:52 -0400 Received: from femail28.sdc1.sfba.home.com ([24.254.60.18]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Thu, 18 Oct 2001 21:57:18 -0400 Received: from patwpclap ([65.0.91.208]) by femail28.sdc1.sfba.home.com (InterMail vM.4.01.03.20 201-229-121-120-20010223) with SMTP id <20011019020922.PJOK22390.femail28.sdc1.sfba.home.com@patwpclap>; Thu, 18 Oct 2001 19:09:22 -0700 Message-ID: <000701c15843$607332a0$6601a8c0@patwpclap> From: "Pat Weston" To: , References: <290801241.36508@webbox.com> <3B8D9BF0.AEE88D7@perigee.net> Subject: Re: ES Aileron Counterweights Date: Thu, 30 Aug 2001 20:05:43 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> > There must be an easier and far more elegant solution for > installing the aileron counterweights than is called for in > the manual. I describe the several methods tried to do this well in my web site http://www.members.home.com/dylanw12 for my ES. The most successful method was the last one described where I cast my own counterweights using the lead provided in the kit. However, if I were to do it again, I'd buy tungsten rods (about 1.4" diameter) from the vendor mentioned in the web site. Good luck Pat >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>