Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b5) with ESMTP id 921312 for rob@logan.com; Wed, 10 Oct 2001 21:11:38 -0400 Received: from ftpbox.mot.com ([129.188.136.101]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Wed, 10 Oct 2001 09:29:22 -0400 Received: [from pobox2.mot.com (pobox2.mot.com [136.182.15.8]) by ftpbox.mot.com (ftpbox 2.1) with ESMTP id GAA26317 for ; Wed, 10 Oct 2001 06:41:15 -0700 (MST)] Received: [from fl67exm01.geg.mot.com (fl67exm01.geg.mot.com [137.161.130.230]) by pobox2.mot.com (MOT-pobox2 2.0) with ESMTP id GAA18476 for ; Wed, 10 Oct 2001 06:41:14 -0700 (MST)] Received: by fl67exm01.geg.mot.com with Internet Mail Service (5.5.2654.52) id ; Wed, 10 Oct 2001 09:41:13 -0400 Message-ID: <7BCC00C595FCD21189560008C7CF1223013A1BA2@fl67exm01.geg.mot.com> From: Gordon Donald-P1019C To: lancair.list@olsusa.com Subject: RE: IO360 Idle RPM and Oil Date: Wed, 10 Oct 2001 09:41:12 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Mike, I'm no engine expert, but I have talked extensively to the shop that overhauled my engine about these issues. The idle speed is not critical. My engine will not idle smooth at 600 rpm. Adjust the idle speed screw so that you get a least 600 rpm., or a speed at which your engine will idle smoothly. My engine, with a light wood propeller, won't idle smooth below 800 rpm. In addition, idling below 1000 rpm for extended periods of time increases the likelihood of fouling your plugs. However, the higher your idle rpm, the faster your aircraft will taxi and you must apply more breaking to hold your taxi speed to something reasonable. Use your mineral break in oil for new or overhauled cylinders for at least 50 hours. Switch to Ashless Dispersant oil after the initial break-in. Monitor your break-in oil consumption. Your oil consumption rate should improve during the first 50 hours. I don't recall the specific rates but I believe 1 quart every 20 to 25 hours is reasonable after break-in. Check and clean your plugs every oil change as well. They will tell you about the health of each cylinder. If any of your top plugs are oily, that cylinder may be having break-in problems. There is lots of information on the Web about all of this. Good luck on your first flight. Don >>From: Mike S. Reinath What should the idle RPM be set to? Is 800 okay?<< >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>