<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Guys -

Simple question that needs a quick answer.

My LNC2 (actually, a 320/360) manual states that the flaps should have a
travel range from 5/8" TE up from faired in position at fuselage fillet, to
full down.  I am fitting the lower skin, which seems to want to have the
outboard trailing edge level with the aileron-in-trail and the inboard edge
approximately 5/8 inch up from the fillet.  However, I'm now at the point
where inducing a twist is easy.

I had though that the level-with-the-ailerons and simultaneously
level-with-the-fillet position was the cruise position, embodying a -7 degree
reflex.  Now the manual seems to be saying that the cruise position is 5/8
inch UP at the inboard edge?

I have more digging though manuals and blueprints to do, but I wanted to fire
this off in time for this evenings posting, so that I can install the flap
spar tomorrow.

Thanks in advance.

- Rob Wolf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>