Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 853126 for rob@logan.com; Mon, 20 Aug 2001 05:30:54 -0400 Received: from dirty.research.bell-labs.com ([204.178.16.6]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with SMTP id com for ; Mon, 20 Aug 2001 02:52:55 -0400 Received: from nslocum.cs.bell-labs.com ([135.104.8.38]) by dirty; Mon Aug 20 02:59:20 EDT 2001 Received: by nslocum.cs.bell-labs.com (8.9.3/8.9.3) id CAA19463651 for olsusa.com!lancair.list; Mon, 20 Aug 2001 02:59:09 -0400 (EDT) Message-Id: <200108200659.CAA19463651@nslocum.cs.bell-labs.com> Date: Mon, 20 Aug 2001 02:56:47 -0400 To: lancair.list@olsusa.com From: "Rae McLellan" Subject: splicing wires X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> > The clear tubing allows you to see the whole process and verify results. The > heat shrink is strain relief for the solder joint. They come in a variety of > sizes. http://www2.towerhobbies.com/cgi-bin/WTI0095P > > What else do you want? I'd like a mechanical connection first, before soldering. I don't think sliding the two wires alongst each other inside the solder ring qualifies. Rae McLellan >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>