Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 852806 for rob@logan.com; Sat, 18 Aug 2001 21:19:46 -0400 Received: from smtp.olsusa.com ([63.150.212.3]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Sat, 18 Aug 2001 21:09:13 -0400 Received: from ws-01.olsusa.com ([207.30.195.72]) by smtp.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sat, 18 Aug 2001 21:12:14 -0400 Message-Id: <5.1.0.14.2.20010818212034.052986c0@pop3.olsusa.com> Date: Sat, 18 Aug 2001 21:21:10 -0400 To: lancair.list@olsusa.com From: Marvin Kaye Subject: Re: LNC2 LASAR ignition system Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Posted for Sky2high@aol.com: Bill, Thanks for the info. I will be ordering very very soon. After I remove an un-necessary and large fast-on ground terminal block, I have a loose 5x7 area on the left side of the firewall which I will check for depth. I have the VM EPI 800 system and generally don't see CHT's higher than 380-390 in warm weather climb so I didn't think I would need the CHT monitor either. I see that the Unison parts matrix suggests "APM 1-96 (CHT Control)" for the I/O 320 and "SL1-95,SL2-95 (no CHT)" for the O 320. I don't mind if it is required, it's just that I don't know which probe to request - dual point "J" or "K" so I can continue to feed the EPI 800. Thanks again, Scott Krueger >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>