Date: Tue, 7 Aug 2001 17:29:55 -0400
From: John Kleber & Annette Worthington <73761.230@compuserve.com>
Subject: Re: double lap hyd flaring tool
Sender: John Kleber & Annette Worthington <73761.230@compuserve.com>
To: "INTERNET:lancair.list@olsusa.com" <lancair.list@olsusa.com>
Message-ID: <200108071730_MC3-DBAD-1D93@compuserve.com>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	 charset=ISO-8859-1
Content-Disposition: inline
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Bruce,

This is info from a recent post from Walter Dodson:  

"I bought the 37 degree double lap flaring tool p/n 12-00210 from A C
Spruce.
It is priced at $519.95.  It is not quite as good as the old military
flaring tool which comes in its own O.D. green metal box.  I can't find
that one anywhere or I would have chosen it.
The tool I did get from Spruce is nice.  It's made by US Air Tool Co. and
their p/n is 04-256-F.  It has a nice blow molded plastic case and includes
spacer blocks for the double lap operation first "push" as well as a tube
cutter and a nice deburring reamer.  The tool mounts in your bench vise."

I've never used a double lap flaring tool before, but I'm going to learn.

The last thing I want is a hydraulic line failure!  It pays to do things 
by the book.    Hope this helps.

Thank you Walter!

John Kleber
N83JK   LEG2/G

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>