Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b2) with ESMTP id 831064 for rob@logan.com; Wed, 18 Jul 2001 08:30:29 -0400 Received: from spdmbaaa.compuserve.com ([149.174.206.153]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Wed, 18 Jul 2001 08:21:05 -0400 Received: (from mailgate@localhost) by spdmbaaa.compuserve.com (8.9.3/8.9.3/SUN-1.9) id IAA19287 for lancair.list@olsusa.com; Wed, 18 Jul 2001 08:30:12 -0400 (EDT) Date: Wed, 18 Jul 2001 08:24:07 -0400 From: Marvin Kaye <74740.231@compuserve.com> Subject: Fw: Cowl hinges Sender: Marvin Kaye <74740.231@compuserve.com> To: Lancair Mail List Message-ID: <200107180828_MC3-D9A9-FD1@compuserve.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Posted for Ted Stanley : Ian - Never done the job myself but if I were I'd: locate the hinges drill the rivet holes bond the hinges in place with Hysol or other adhesive hold the hinges in place using Clecos while waiting for the adhesive to harden after the adhesive hardens remove the clecos redrill all the rivet holes install the rivets "wet" using adhesive This method of "bedding" the hinges and the rivets should eliminate any fretting on the part of either you or the hinges. Ted Stanley - A&P-IA >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>