<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
I agree with Lorn Olsen, I have not been able to
manipulate the charts  in the Lycoming Operator?s
Manual to extract the information I need!!
  What I?m looking for is the following: Cruise manifold
pressure and rpm settings for 65% & 75% power at
various altitudes, plus the fuel flows to lean to at
those altitudes. I am running an IO-360-B1E engine in
my LNC2. The Lycoming web site FAQ?s has an entry that
says the above data is contained in the specific
airframe user?s handbook.  Obviously no such manual
exists for us. Can any of you using the same, or
similar engine in your LNC2?s tell me what you are
using for altitude cruise settings?


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>