<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Posted by "Neal Garvin" <ngarvin@home.com>:
Subj:  For Bill Hogarty

Bill,

>> Getting the protective coating off the Plexiglas <<

The best way is to build the thickness of the protective coating up so you
can just peel it off like a blanket (as opposed to peeling it like a bad
sunburn).

Either brush on a bunch more layers of the protective coating, or lay down
a couple layers of masking tape or package tape - or both.  I had the
coating on for 5 years and after doing the above (to protect it better from
falling tools etc over the years) it peeled right off.

good luck.

Neal Garvin
Glasair N15F
MMK-CT
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>