<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>>
Dino:

Thanks for the input. The factory is still recommending the total 2 degree
AOI for any engine installed. I will set min at 2 degrees. My wings came out
1.8 degrees so I will install the stabilizer with a -0.2 degree AOI.

Thanks again

Gene Long

----- Original Message -----
From: Rubli, Dino <DRubli@HATCH.CA>
To: <lancair.list@olsusa.com>
Sent: Friday, July 13, 2001 5:57 AM
Subject: ES Angle of Incidence


>           <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
>           <<  Lancair Builders' Mail List  >>
>           <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
> >>
> I had already installed the HS at 0 degrees incidence, as per the manual,
> before this became an issue on the list a year or so ago. I was therefore
<SNIP>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>