Date: Fri, 13 Jul 2001 09:39:09 -0400
From: Marvin Kaye <74740.231@compuserve.com>
Subject: LIV-P windows
Sender: Marvin Kaye <74740.231@compuserve.com>
To: Lancair Mail List <lancair.list@olsusa.com>
Message-ID: <200107130941_MC3-D927-CF13@compuserve.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	 charset=us-ascii
Content-Disposition: inline
Reply-To: lancair.list@olsusa.com

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
          <<  Lancair Builders' Mail List  >>
          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> 
>>
Posted for Billhogarty@aol.com:

Need  to find  the best way to get the protective coating off the windows
of my IV-P.   The film has been  for at least seven or more years and I
dont remember this subject being discussed before.

I had originally planned to remove the film prior to installing the top but
now am having second thoughts, considering all the layups that have to go
inside after the top is on.  Any consensus here?

Has anyone found a good way to get the top in position without making a
major HYSOL mess???  I did put a 3 inch capstrip across the top of the
firewall which makes the forward end pretty easy to install but I am
concerned about the sides.  Any thoughts would be appreciated.

Regards, Bill Hogarty IV-P at 88%
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LML website:   http://www.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair

Please send your photos and drawings to marvkaye@olsusa.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>