Mailing List flyrotary@lancaironline.net Message #9831
From: DaveLeonard <daveleonard@cox.net>
Subject: RE: [FlyRotary] Re: New Scoop
Date: Fri, 16 Jul 2004 09:00:51 -0700
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message
Very nice looking installation Rusty, but it will never make up for BUC.  That image is scored into my retinas like any terrible image you wake up to in the middle of the night with cold sweats...   the horror...  the horror.....
 
Dave Leonard  :-)


 

 Rusty,

My memory is not what it used to be.  Are you running the usual dual evaporator cores?  Have you posted any photos where they can be seen?

Bill

Hi Bill,

Let me know when you get this memorized, and I'll change it again :-)    The pic shows the current arrangement of the coolers.  The top two are water, and the bottom is oil.  All use AN12 hose.  The water cores are run in series, and I have the stock pump, as well as a Davies Craig EWP for pumps.  So far, I have run both pumps at all times, but I need to try turning off the EWP in flight to see if it raises the temp.   

Rusty (don't hate me because I'm cool)

 

PS- sorry for the delay.  Lightning + MRI scanners = overtime.   

 

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster