Thanks Kelly. I would like to replace the banjos since they are more restrictive, and with oil every little bit helps.
Bulent


On 7/16/04 2:42 AM, "keltro@att.net" <keltro@att.net> wrote:

Bulent,

   I have a Cosmo 13B . There are Metric to AN adapters that will replace the banjo

in most if not all cases. Both the engine and the oil coolers. May take a little hunting

but probably worth it as the banjo fittings are restrictive to oil flow. IMHO

 Jump in here guys! Any other opinions?

 

Kelly Troyer

--
Dyke Delta/13B/RD1C/EC2

-------------- Original message from Bulent Aliev : --------------
> Ed, the oil return on my engine is a banjo fitting under the old oil filter
> mount and I don't see how I can adapt it. I can use one mm/AN for the oil
> exit. The oil cooler also comes with built in banjo fittings and the remote
> oil filter has 1/2" NPT ports. I see lots of trips to the hydraulic supply
> store in my future :)
> Bulent