Ed, the oil return on my engine is a banjo fitting under the old oil filter
mount and I don't see how I can adapt it. I can use one mm/AN for the oil
exit. The oil cooler also comes with built in banjo fittings and the remote
oil filter has 1/2" NPT ports. I see lots of trips to the hydraulic supply
store in my future :)
Bulent

On 7/15/04 5:32 PM, "Ed Anderson" <eanderson@carolina.rr.com> wrote:

> Bulent, I used AN-10 hose and fittings.  I have mm/An adapters screwed into
> the block for oil exit and entrance and then built my own hose using the
> external stainless steel line.  I use it for gasoline, oil and coolant but
> will admit that it just bit overkill for the coolant and would go with
> something different if doing it again such as top quality radiator hose.
>
> Never a leak (so far)
>
> Ed
> Ed Anderson
> RV-6A N494BW Rotary Powered
> Matthews, NC